New Wyco Concrete Vibrators
CONCRETE VIBRATORS
Wyco High Cycle Vibrators are manufactured to properly consolidate difficult performance-based concrete
mix designs. The consistent speed output, under variable loads, produces uniform results. The unique
Squarehead™ design ensures that your job will have the quality and production you have come to expect
from Wyco.
ELECTRIC CONCRETE VIBRATORS
| Model | Description | Flexible Shafts | Square Heads |
|---|---|---|---|
| 902A | 12 amp, 2 wire cord | 2’, 5’, 7’, 10’, 14’, 20’ | 7/8”, 1-1/16”, 1-3/8”, 1-3/4” |
| 992A | 12 amp, 3 wire cord | 2’, 5’, 7’, 10’, 14’, 20’ | 7/8”, 1-1/16”, 1-3/8”, 1-3/4” |
| 903 | 15 amp, 2 wire cord | 2’, 5’, 7’, 10’, 14’, 20’ | 1-3/8”,1-3/4”, 2”, 2-1/4” |
| 993 | 15 amp, 3 wire cord | 2’, 5’, 7’, 10’, 14’, 20’ | 1-3/8”,1-3/4”, 2”, 2-1/4” |
BACKPACK CONCRETE VIBRATORS
This compact, gas-powered concrete vibrator is a truly portable one-man operation. There are no air hoses or electric cords to tangle you up in the rebar or tie down. Just strap on the lightweight tubular frame and this little workhorse goes anywhere you go. It’s ideal for bridge decks, culverts and/or any other “hard-to-reach” remote concrete construction sites. It’s also ideal as an emergency standby vibrator in case of power failure on the job site.
| Model | Description | Flexible Shafts | Square Heads |
|---|---|---|---|
| Robin 2-cycle | 40.2 cc Air Cooled | 7’, 10’, 14’ | 13/16”, 1”, 1-3/8”, 1-3/4”, 2”, 2-1/4” |
HIGH CYCLE CONCRETE VIBRATORS
| FEATURES | V-200 | 1000 | 1300 | 1600 |
|---|---|---|---|---|
| Head Size |
2”
|
2-3/8”
|
2-5/8”
|
2-3/8”
|
| Head Length |
14.7”
|
17.30”
|
18.30”
|
19.30”
|
| Head Weight |
9 lbs.
|
16 lbs.
|
17 lbs.
|
18 lbs.
|
| Head Oil |
N/A
|
60 ml
|
70 ml
|
80 ml
|
| Amplitude |
.062”
|
.073”
|
.087”
|
.100”
|
| Force* |
500#
|
1,000#
|
1,300#
|
1,600#
|
| Electric Current |
230 volt, 180 Hz, 3-phase
|
|||
| Amps |
10 Amps
|
|||
| Hose Length |
6,16,21 or 30 feet
|
|||
| Cord Length |
25 feet
|
|||
PNEUMATIC CONCRETE VIBRATORS
Efficient, easy-to-handle variable air flow rate through twist grip throttle. Designed for quiet, smooth operation. Lengths available up to 20 feet..
| Features | BA35 | BD55 | BD65 | BD75 |
|---|---|---|---|---|
| Diameter of head (in.) | 1.42 | 2.2 | 2.64 | 3.03 |
| Length of Head (in.) | 10.51 | 13.54 | 14.37 | 15.67 |
| STD Hose Length (ft.) | 10 | 10 | 10 | 10 |
| Weight of Head (lbs.) | 3.3 | 9.9 | 17.38 | 19.6 |
| Total Weight (lbs.) | 17 | 27 | 31 | 36 |
| Frequency (vpm) | 17,600 | 17,700 | 17,700 | 17,000 |
| Air Consumption (cfm) | 14 | 28 | 32 | 39 |
| Amplitude (in.) | 0.027 | 0.037 | 0.054 | 0.07 |
RECOMMENDED OPTIONS:
Strainer removes contaminates from air line.
Oiler assures lubrication of internal components in pneumatic head.