NEW EQUIPMENT SALES
MUCH MORE THAN
AIR COMPRESSORS!®
AIR COMPRESSORS!®
Demolition Hammers & Hammer Drills
LOADING ....
Demolition Hammers
Demolition, electrical, remodeling,
plumbing and HVAC contractors will truly appreciate the
performance these Bosch demolition hammers offer. Two to three
pounds lighter than a combination hammer, Bosch demolition
hammers remove 350 to 400 pounds of 5000 PSI concrete per hour.
A typical 1 1/2-inch combination hammer removes 175 to 225
pounds per hour. And since time is money, professionals
appreciate the difference this makes to their bottom line.
MODEL |
11316EVS |
11317EVS |
11318EVS |
11387 |
11388 |
 |
 |
 |
 |
 |
|
| Drive System |
SDS-max™ |
3/4” Hex |
SDS-max™ |
Round-Hex |
SDS-max™ |
| Amperage | 14.0A |
12.8A |
11.0A |
10.0A |
10.0A |
| Impact Energy (ft. lbs.) |
4.4-18.4 |
4.0-16.5 |
8.85.9 |
5.9 |
5.9 |
| No-Load BPM | 900 - 1,890 |
850 - 1,800 |
1,300 - 3,300 |
2800 |
2800 |
| Weight | 22.5 lbs. |
22.0 lbs. |
12.5 lbs. |
12.0 lbs. |
11.6 lbs. |
| Tool-Free Bit/ Steel Changes |
YES |
YES |
YES |
YES |
YES |
| Service Minder™ Light | YES |
YES |
YES |
------- |
------- |
| 360º Auxiliary Handle |
YES |
YES |
YES |
YES |
YES |
| Vario-Lock™ Positioning |
YES |
YES |
YES |
YES |
YES |
11304 Brute™ Breaker Hammer
(Shown Above)
• 15.0 Amp Motor, 1,400 BPM
• Impact Energy: 43 ft. lbs.
• Plug-in-anywhere – no
compressor needed
• Total portability – operates
on 115/120V AC/DC, 15 Amp outlet or 2,500 watt generator
• Service Minder™ brush system
– shuts the Brute off when maintenance is required
• Shock-mounted handles –
absorbs vibration to reduce operator fatigue
• 2-way tool retainer –
accepts standard 1-1/8” hex, air tool steel with
retaining collar or Bosch internal locking combo steel
Variable-speed dial - for controlled chipping applications
Service Minder™ light - indicates when preventive maintenance is required
360° Auxiliary handle - provides a wide range of movement along with operator comfort
Vario-Lock™ positioning - Rotates and locks chisel into 12 different positions to optimize working angle
Service Minder™ light - indicates when preventive maintenance is required
360° Auxiliary handle - provides a wide range of movement along with operator comfort
Vario-Lock™ positioning - Rotates and locks chisel into 12 different positions to optimize working angle
Corded Hammer Drills
Cordless Hammer Drill/Drivers
MODEL |
1194AVRS |
1199VSR |
 |
 |
|
| Amperage | 8.0A |
8.5A |
| Chuck Size | 1/2” Keyed |
1/2” Keyed |
| No-Load RPM High Torque High Speed |
0 - 1,000 0 - 2,600 |
0 - 1,100 0 - 3,000 |
| No-Load BPM High Torque High Speed |
0 - 16,000 0 - 41,600 |
0 - 18,000 0 - 48,000 |
| Weight | 5.3 lbs. |
6.0 lbs. |
MODEL |
1194AVRS |
1194AVRS |
1199VSR |
 |
 |
 |
|
| Volts | 14.4V |
18V |
24V |
| Chuck Size | 1/2” Keyed |
1/2” Keyed |
1/2” Keyed |
| Clutch Settings | 15 |
15 |
15 |
| No-Load RPM High Torque High Speed |
0 - 450 0 - 1,500 |
0 - 450 0 - 1,500 |
0 - 450 0 - 1,500 |
| No-Load BPM | 18,000 |
18,000 |
18,000 |
| Weight | 6.2 lbs. |
6.7 lbs. |
7.8 lbs. |
• Two-speed gear box – for high-speed or high-torque
applications
• Two modes of operation – rotation only or hammer drill
mode
• 360° Auxiliary handle with built-in depth gauge - provides a
wide range of movement along with consistent drilling depth
• Variable-speed reversing
trigger w/lock-on – for
accurate bit starting as well as removing fasteners or bound
bits
• Pistol grip handle - compact ergonomic design with soft grip
•
Two-speed gear box –
for high-speed or high-torque applications
• Steel reinforced collar enhances durability and protects tool
• Variable-speed reversing
trigger w/lock-on – for
accurate bit starting as well as removing fasteners or bound
bits
• Unibody power train maintains alignment between clutch,
gearbox, and motor for the most durable drivetrain system on
the market
• Ratcheting, single-sleeve
1/2” chuck with carbide jaws –
For one-handed operation
